Commission Regulation (EC) No. 1702/2003
Airworthiness & Enviromental Certification - Implementing Rules
Commission Regulation (EC) No.1702/2003 of 24 September 2003 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production
Consolidated version of Regulation (EC) No 1702/2003
Consolidated version of Regulation (EC) No 1702/2003
This consolidated version takes into account the following Amending Regulations:
- Commission Regulation (EC) No 1194/2009 of 30 November 2009 amending Commission Regulation (EC) No 1702/2003 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances as well as for certification of design and production organisations (OJ L 321, 8.12.2009, p. 5).
English version of this Regulation is corrected by the Corrigendum (OJ L 336, 18.12.2009, p. 58). All languages versions are corrected by the Corrigendum (OJ L 58, 9.3.2010, p. 23).
The Consolidated version of Regulation (EC) No 1194/2009 takes into account the Corrigendum (OJ L 336, 18.12.2009, p. 58).
- Commission Regulation (EC) No 1057/2008 of 27 October 2008 amending Appendix II of Annex to Commission Regulation (EC) No 1702/2003 concerning the Airworthiness Review Certificate (EASA Form 15a) (OJ L 283, 28.9.2008, p. 30)
- Commission Regulation (EC) No 287/2008 of 28 March 2008 on the extension of the period of validity referred to in Article 2c(3) of Commission Regulation (EC) No 1702/2003 (OJ L 87, 29.3.2008, p.3)
- Commission Regulation (EC) No 375/2007: of 30 March 2007 amending Commission Regulation (EC) No 1702/2003 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations (OJ L 94, 4.4.2007, p. 3)
- Commission Regulation (EC) No 335/2007: Adapting Part 21, Section A, Subpart I and adapting EASA Form 45 of 1702/2003, of 28 March 2007 amending Commission Regulation (EC) No 1702/2003 as regards the implementing rules related to environmental certification of aircraft and related products, parts and appliances (OJ L 88, 29.3.2007, p. 40)
- Commission Regulation (EC) No 706/2006 of 8 May 2006 amending Commission Regulation (EC) No 1702/2003 as regards the period during which Member States may issue approvals of a limited duration (OJ L 122, 09/05/2006. p. 16)
- Commission Regulation (EC) No 381/2005 of 7 March 2005 amending Regulation (EC) No 1702/2003 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations (OJ L 61, 08/03/2005, p. 3)
Consolidated versions of EC regulations can be found on http://eur-lex.europa.eu/RECH_consolidated.do. You will also find the latest versions of EASA Implementing Rules there. These consolidated versions can be obtained in English, French and German.
Part 21 Acceptable Means of Compliance (AMC) and Guidance Material (GM)
The rules issued by the Agency on AMC and GM relating to Certification and Continuing Airworthiness are posted on Acceptable Means of Compliance (AMC) and Guidance Material (GM) page.
Certification Specifications (Airworthiness Codes)
The Certification Specifications issued by the Agency are posted on Certification Specifications page.